nitrile oilfield fuel hoses for psi

Tank truck hose in all-rubber, hardwall, 150 PSI style

Series 2235 Corrugated Petroleum Tank Truck Hose – 150 PSI. Series 2235 is a corrugated flexible, lightweight suction and discharge hose designed to handle oil and refined fuels such as gasoline, diesel, ethanol and bio-diesel (to B20 in dedied service). The cover is resistant to ozone, abrasion, oil, and weathering.

Oil & Gas Exploration Hoses – Industrial Hoses – Eaton

Suction and Discharge Hoses: EHP007 - Oilfield Suction Hose. Tube: Nitrile blend. Reinforcement: High-tensile synthetic textile - single steel helical wire; and. dual on 8” & 10” with an anti-static copper wire. Cover: Nitrile blend. Temp: -35°C to +70°C, (-31°F to +158°F) Pressure: 10,5 bar / …

Nitrile Fuel Hose 300 PSI

Cover: Ozone, oil resistant synthetic nitrile rubber. Nitrile Fuel Hose Appliion: Softwall hose Designed for the discharge of petroleum-based products, diesel, gasoline, lubricants, fuel, with aromatic content up to 50%. Nitrile Fuel Hose Temperature: -32°C to +82°C (-90°F to +180°F) Nitrile Fuel Hose Characteristic:

FUEL LINE HOSE - Gates Corporation

FUEL LINE HOSE. Before you start your engines, equip them with Gates fuel hoses. We’ve engineered our fuel line hoses at the cutting-edge of fuel-efficient, environmentally-safe design, so your engine will perform with superior power. Filter By:

Tank Truck Oil Hose 150PSI

Working pressure is a vital factor when you select the right hose for your special appliions. Tank Truck Oil hose Construction: Tube: Black, smooth, Nitrile rubber. Reinforcement: High strength synthetic fabric and helix wire, with anti-static wire. Cover: Black or Red,smooth or corrugated, oil, fuel, and weathering resistant synthetic rubber.

JGB Frac Hose - JGB Fracturing Hose - Frac Hose - Oilfield

JGB presents the JGB Frac Hose - JGB Fracturing Hose - Frac Hose - Oilfield Fracturing Hose - Oil field equipment Hoses, Fittings, and Couplings for Oil field: pumps, frac tanks, oilfield trucking, fresh water hoses, vacuum pump hoses, pressure wash, wire braid air, hydraulic hoses. We can provide high oil resistant tank truck hose, EPDM water suction, chemical hoses, and many …

Petroleum Hose For Oilfield Appliions is a chief focus

Petroleum hose for oilfield appliions are used in the high-pressure transfer of multiple types of hydraulic fracking fluids from tank trucks. These hoses are constructed with a dual steel helix wire to obtain a high vacuum rating. Oilfield uses may include: Filling and emptying petroleum tanks at the fracking site. Oilfield service truck use.

Tank Truck Hose 150 PSI, Pertroleum Transfer Hose

Petroleum tank truck hose 150 PSI. JYM® tank truck hose is designed to handle water, hot air (up to 240 °C), fuel, gas and oil, abrasive products, milk, chemical products Temperature: -20ºF to +180ºF (-30ºC to + 80ºC) Tube: Black high grade of oil resistant Nitrile(NBR).

Item # 4348-0400-100, 4" I.D.4348 Frack Oilfield Fuel

All egories All egories. Hose, Couplings, Accessories and Skirtboard Products Hose, Couplings, Accessories and Skirtboard Products. Petroleum Hose Petroleum Hose. 4348 Frack Oilfield Fuel Discharge Hose - 400 PSI 4348 Frack Oilfield Fuel Discharge Hose - 400 PSI. Item # 4348-0400-100.

Oilfield Hose Powerbraid® Plus | Dakota Fluid Power

Oilfield Hose Powerbraid® Plus (Slim Hole Rotary) (Specifiion 3670H, 4651RL, ZL) RECOMMENDED FOR: Rotary appliions on workover rigs and slim hole or seismograph rigs designed to operate at a maximum of 2,000 to 5,000 PSI …

Oil Field Hose - GHX

Onshore and offshore, today''s drilling environments demand the most advanced products, superior performance, and excellent service. Oil field hoses consists of High Pressure hoses, Rotary, Kelly, Vibrator, and Mud Pump hoses, Cementing hoses, Choke and Kill hoses, Blow Out Preventer (BOP) hoses, and Petroleum and Fuel Transfer hoses.

opinions on nitrile fuel hose - Modded Mustang Forums

4/6/2012· He means reinforced nitrile. Submerged fuel lines need to be made out of nylon reinforced nitrile hose. Most of the cheap stuff is a composite of nitrile rubber on the inside, nylon reinforcement in the center, and natural rubber on the outside. You don''t want this for fuel appliions where both the ID and OD of the tube is exposed to gasoline.

EATON Oilfield Suction Gasoline Hose, Nitrile, 2 in, 20 ft

Oilfield Suction Gasoline Hose, Nitrile, 2 in, 20 ft, 150 psi, 2 in x 2 in Fitting Size. Item # 45CV38. Mfr. Model # EHP009-32-20-ALCE. UNSPSC # 40142007. alog Page # 2607. 2607. Country of Origin Turkey. Country of Origin is subject to change. These nitrile blend oil and gas exploration hose asselies are rated for vacuum appliions.

Rotary Vibrator Hose 5000PSI Grade D (Kelly Hose)

This hose can also be used as a Motion Compensator hose for stabilization of rotary drilling and pumping equipment against vertical wave action on offshore drill platforms. The Motion Compensator hose is not recommended for phosphate …

Nitrile Petroleum Hose | McMaster-Carr

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products. It is reinforced with a steel wire that provides an escape route for electrostatic buildup when used in a grounded system. It is not for use on a reel. To connect fittings, insert the plug into the socket and push the levers down.


Safety Oilfield Clean-Up and Recovery Hose - SΩ Nitrile Fuel Discharge Hose - 300 PSI Frack Oilfield Fuel Discharge Hose - 400 PSI HD Oilfield Liquid Mud Discharge Hose - 600 PSI Drilling Mud, Oilfield Suction and Discharge Hose - 150 PSI Blue Low Temp Petroleum Suction Hose - Corrugated Oilfield Suction & Discharge Hose - 150 PSI

Prospector™ Flex Oilfield < Chemical Transfer & Petroleum

Marking: Continental ContiTech Prospector™ Flex Oilfield 150 PSI Appliions. Prospector™ Flex Oilfield is for use in the tank truck service industry including oilfield appliions, handling crude oil, drilling mud and diesel fuels. It can be used for in-plant transfer of diluted industrial chemical and petroleum waste, sludge and sediments.

Petroleum Hose - Jason Industrial, Inc., A Megadyne Group

4328 Nitrile Fuel Discharge Hose - 300 PSI (5) 4348 Frack Oilfield Fuel Discharge Hose - 400 PSI (2) 4410 Blue Low Temp Petroleum Suction Hose - Corrugated (2) 4415 Oil Return Hose SAE 100R4 (5) 4418 Crude Oil Waste Pit Suction Hose (6) 4419 Crude Oil Waste Pit Suction Hose (4)

Jason Industrial - Petroleum & Oilfield Hose | Anderson

4420: Nitrile Petroleum Suction Hose - 150 PSI; 4421: Tank Truck Hose - Red Corrugated; 4423: Bio-Diesel/Ethanol Suction and Discharge Hose; 4424: Nitrile Petroleum Suction Hose - 400 PSI; 4426: Dreamflex Petroleum Transfer & Suction Hose; 4429: Hot Tar & Asphalt Suction Hose - 150 PSI; 4436: Oilfield Petro Waste Suction Hose

Hoses - Petroleum Transfer - Summary

Hose - Fuel Oil Delivery Transfer - Gasoline / Petrol / Diesel / Oil. This is a multi-use hose for transferring gasoline, petrol, diesel, oil, kerosene and other petroleum fluids. Used in industrial, commercial, construction site, farm and other loions. Good to 250 PSI working pressure with a 4:1 safety factor.

Nitrile Rubber Hose | McMaster-Carr

Choose from our selection of nitrile rubber hose, including petroleum hose, air hose, and more. In stock and ready to ship. Multi-spiral yarn reinforcement gives this hose strength to withstand pressures up to 250 psi. Hose is not for use with gasoline. Medium-Pressure Fuel Oil Hose with Male Threaded Fittings. Medium-Pressure Fuel Oil Hose

Buyer''s Guide: How to Pick the Best Flexible Fuel Hose for

24/10/2021· These hoses were the industry standards for decades. SAE 30R6 and 30R7 hoses were designed for fuel systems rated at 50 PSI or less of working pressure like carburetors and TBI fuel injection. The hoses have a nitrile rubber inner liner reinforced with single-ply braided cord and a neoprene rubber cover.

Parker Oil Field Hose alog - Kord Industrial

NOTE: Do not use with refined oil or fuel. Tube: Black nitrile/SBR Reinforcement: Multiple textile plies with wire helix Cover: Black nitrile/SBR; corrugated wrapped finish Temp. Range: -22°F to +185°F (-30°C to +85°C) Brand Method: White text on blue stripe Brand Example: PARKER SERIES 7213E BS&W OIL FIELD SUCTION HOSE 150 PSI MAX WP


Wildter Corrugated Oilfield Petroleum Transport Suction Hose is designed for delivery, transfer and transport of oil and refined fuels in appliions to 200°F and 150 psi. • Tube: Black nitrile for fuel and oil resistance to 200°F.

Tech 101: Fuel-line hose - what you should and should not

5/12/2014· Standard neoprene fuel hose can be used for fuel, PCV and EEC systems on all vehicles where working pressures are under 50 psi or vacuum ratings are under 24-in. Hg for 7/16-inch and smaller inside-diameter sizes (10-in. Hg for ½-inch diameter hose). Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone

PETROLEUM & OILFIELD HOSE 4 - Guaranteed Parts

Petroleum Hoses are divided into: • Fuel Dispensing for diesel, gasoline, and heating oil • Tank Truck suction & discharge hoses • Oil Field Specialty hoses such as BOP, Kelly G603… PREMIUM FARM TANK Tube: Black nitrile/pvc rubber specially compounded to handle unleaded and leaded fuels with up to 50% aromatic content.


Branding TEXCEL F.O.D. Fuel Oil Delivery Hose - - 250PSI WP LOT (white ink letters) I.D. Part Nuer O.D. Std. Length Working Pressure (psi) Lbs./Coil 3/4" FU-12-C200-200W- 1-1/16" 200'' 200 77.00 1" FU-16-C200-200W- 1-13/32" 200'' 200 104.00 TEX-FUEL Fuel Transfer Hose A multi-use hose for transporting leaded, unleaded, lead substitutes, low-

Prospector™ Oilfield 300 < Chemical Transfer & Petroleum

Prospector™ Oilfield 300 is for use in the transfer hose service to clean sediment from oil storage tanks and other general service appliions. The tube is an oil-resistant synthetic rubber. Do not use with gasoline and other refined products when the aromatic content exceeds 35%. Specifiions. Construction Tube: Nitrile; Cover: Black SBR


Branding TEXCEL® GAMMA™-FLEX OVAC - FLEXIBLE OILFIELD SUCTION HOSE NOT FOR REFINED FUELS 150 PSI W.P. Safety Note Not recommended for refined petroleum products Features Exceptional flexibility CUT-TO-LENGTH G U ARANTEE I.D. Part Nuer O.D. Std. Length Working Pressure (psi) Vacuum (in./HG) Bend Radius Lbs./Ft.

Petroleum & Oilfield Hose - Jason Industrial

Frack Oilfield Fuel Discharge Hose. Used for connection to frack tanks, these 400 PSI hoses are designed for the discharge or conveyance of water and oil slurry mixtures. The tube is made of nitrile, while the cover is an EPDM (ethylene propylene diene monomer — M-class — rubber)/SBR (styrene-butadiene rubber) blend. These hoses offer the following benefits: