ultra high temperature textile hose bend radius

MAXX Industrial Hose - MAXX Hose

Bend Radius: Approx. Wt. Per. Ft. Lbs. ULTRA-1: 1: 1.47: 250: 4: 0.530: ULTRA-1.25: 1-1/4: 1.78: 250: 4: 0.750: ULTRA-1.5: 1-1/2: 2.08: 250: 4: 0.960: ULTRA-2: 2: 2.58: 250: 6: 1.300: ULTRA-3: 3: 3.66: 200: 9: 2.090

A primer on hydraulic hose construction

2/3/2015· Also, hose working pressure is rated a quarter of burst pressure, giving the hose a safety factor of four to one, but I digress. Braided hose has excellent flexibility for its strength, and most manufacturers make high-flex braided hose with …

02 - Pacific Hoseflex

Minimum Bend Radius Occurs at Offset Position The moving end is free to move “out of line” from neutral position. To find the live hose length: L = √6(RT) + T2 Lp = √L2 - T2 Minimum Bend Radius Occurs at In Line Position The moving end of the hose is restricted to move only up and down in line as the hose crosses neutral position.

Chemical hose from Unisource Manufacturing for 98% of all

For example, UHMWPE (ultra-high molecular weight polyethyene) lined hose offers chemical resistance that is high enough to allow for thinner hose liners, resulting in a tighter bend radius and reduced force to bend. These factors create a chemical hose that is far easier for the operator to use, reducing fatigue, injuries, and hook-up time.

Hydraulic Hose – HPS Company, Inc.

Size (in) Max. Working Pressure (psi) Min. Burst Pressure (psi) Min. Bend Radius (in) Outside Diameter (in) 1/4: 6500: 26100: 1.77.58: 3/8: 5600: 22600: 2.56.67

RQP5 - One Wire Braid 350-3050 psi Hose Polyester Braid

Medium to high pressure hydraulic oil appliions. The small bend radius, temperature resistance and light weight of RYCO RQP5 hose make it suitable for under the bonnet automotive/ trucking appliions including hydraulic oil, diesel fuel, …

Gates Hose, LP, Sold Per Foot - DECA Diving

Hose Reinforcement — Braided, high tensile synthetic textile cord Hose Covering Material — Type A (Neoprene) Temperature range — -40 to 200° F Working pressure — 1,000 psi Weight — 0.29 lbs per foot. 3/8" ID Inner Diameter — 0.38 in. Outer Diameter — 0.75 in. Minimum Bend Radius — 4 in. Inner Tube Material — Type C (Nitrile) Color — Black

High Temperature & Aggressive Media - REPASSA

The ST-Flare Thru Hose is more than just a low pressure steam hose. Smoothbore PTFE Lined Hose Flare Thru with Stainless Steel Braided Cover. TUBE: Seamless white PTFE. COVER: Braided stainless steel. TEMPERATURE: -20°F to 350°F. AVAILABLE FITTINGS: Flare thru Tri-Clamp®. Flare thru 150# flange. Part Nuer.

Flexible Duct - McMaster-Carr

Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature. Bend-and-Stay Metal Duct Hose for Air Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.

» Hydraulic Hoses - Super Hoze

Highlights : Suitable for use within the temperature range -40°C to +100°C (-40°F to 212°F) Intermittent Temp upto +120°C. SAE 100 R17. Tube: Synthetic rubber, resistant to hydraulic fluids. Reinforcement: One or Two braid of high tensile steel wire. Cover: Oil, weather & abraison resistant synthetic rubber.

HIGH TEMPERATURE RANGE - ALFAGOMMA

content suction and delivery. Specially designed for high temperature appliions and hydraulic oil return lines requiring tight bend radius. Constant operation: -40 °C +135 °C (-40 °F +275 °F) Length: 61 m max Item Code Dash mm in mm in Mpa psi Mpa psi mm in kg/m lb/ft 1001277 12 19,0 3/4" 30,00 1,18 2,1 300 8,4 1200 38,0 1,50 0,630 0,43

Alfaflex-Italy

A more flexible chemical hose designed to handle 98% of all chemicals, solvents and corrosive liquids in both pressure and suction service. T. Ultra High Molecular Weight Polyethylene (UHMW) R. Multiple textile plies with dual helix wire. C. Lightly corrugated blue EPDM compound. T.P.

Textile Covered One Wire High Temperature Hydraulic Hose

SAE Rating: SAE 100R5, SAE J1402, DOT FMVSS 106 AII (3/16" thru 5/8") Cover: Blue Textile Braid, High Temperature Reinforcement: One Wire Braid Temperature: -40F to +300F (-40C to +150C) Compatible Coupling Series: R5 Series Reusable Couplings Part Nuer Hose ID Hose OD Working Pressure(lbs) Min. Burst Pressure(lbs) Min. Bend Radius Weight per 100ft Reel …

RT Hose - Smoothbore FEP Lined EPDM Covered Hose - Rubber Fab

Part Nuer Hose ID Inch Hose OD Inch Bend Radius Inch Max. Working Pressure @70°F PSIG Vacuum Rating @ 70°F in. Hg. Weight per FT; 08RFRT: 0.50: 0.97: 2.50: 500

DENSE-PAC HOSE • Ultra High Pressure Hose PTFE

• High Temperature Heated Hose Appliions • Urethane Transfer Appliions Extreme high pressure hose. Smooth bore improves flow rates. Resists kinking in service. • High durability and unlimited shelf life. Sizes up to 1-1/2” I.D. Lightweight with tight bend radius. Temperature Rating: -65°F (-54°C) to +400°F (+204°C).

INDUSTRIAL HOSE & FITTINGS - ALFAGOMMA

hose 174BB Air ducting - high temperature +100 °C (+212 °F) UL 94 V0 Construction: Textile fabric coated with flame resistant PVC Reinforcement: Steel helix wire Use: Hot air, gas, fumes extraction. Air conditioning-ventilation Temperature:-20 °C +100 °C (-4 °F +212 °F) 178AA Air ducting - high temperature +120 °C (+248 °F)

INDUSTRIAL HOSE - Texcel Rubber

Reinforcement High tensile tire cord plies with dual helix wires Temperature -40°F to +212°F (-40°C to +100°C) Branding TEXCEL® HBR4-12 MSHA MEETS OR EXCEEDS SAE 100R4 Specifiions Meets or Exceeds SAE 100R4 I.D. Part Nuer O.D. Working Pressure Burst Pressure Bend Radius Weight

LOW PRESSURE HIGH TEMP HOSE - PIRTEK AUSTRALIA

Temperature Range. • -40ºC up to +149ºC hydraulic/transmission oils (petroleum based) & Diesel. • -40ºC up to +100ºC E10 & B20 (biodiesel) • 0ºC up to +82ºC water/water based fluid & glycol (anti-freeze) • 0ºC up to +121ºC air. • -40ºC up to +121ºC aient.

FLEXIBLE SILICONE hoses for industrial ENGINES

Temperature range: -60ºC to +180ºC (-76ºF to +356ºF) Length: From 1 to 4m (3,8 to 13,12ft). Can be cut to smaller lengths upon the request of the customer. Main characteristic: High flexibility due to the wire spiral. Corrugated inner and outer appearance. Suitable for use where a very small bending radius is required. Inner diameter* Working

Hydraulic Hose - Drill Flex USA

Hydraulic Hose Because of the wide variety of appliions, hydraulic hose varies in size, weight, rated working pressure, nuers and type of reinforcement layers, economics, temperature ratings and flexibility. Low Pressure - high temperature return line hose, flexible, 1/2 bend radius. - sizes up through 4 1/2" to handle all return line jobs.

What Does Hose Bend Radius Mean - New-Line

The bend radius (calculated in a lab environment, appliions may vary) is measured as the distance to the inside edge of the hose (not the center line) when making a 90° bend. When bent at too sharp an angle, the reinforcement may be unduly stressed or distorted, thereby shortening the hose life. Textile reinforced hoses have a tendency to kink as the bend radius is reduced.

Resistoflex® offers solutions for resolving permeation issues

• Ultra Flexible - Twister requires a minimum amount of force to fl ex, making this an excellent choice for handling and reducing strain on adjoining equipment • 1:1 nominal diameter to bend radius – A 2” hose has a 2” bend radius! • Virtually kink-proof design • Tefl on® PTFE inner core provides outstanding

High Temperature Meets Flame Resistance - Process Hose

Low-pressure, high temperature return line or suction line for petroleum- and water-based hydraulic fluids. Vacuum rating 25 in Hg. HR4 has half the bend radius of typical SAE 100R4. Inner Tube Nitrile Fitting Reference All fittings compatible with the HR4 hose family are listed in Section 5 (starting on page 187) of the alog. Note: No

PETROLEUM STEAM & CHEMICAL HOSE - Midland Industries

REINFORCEMENT:High tensile wire helix eedded between layers of textile cords. TUBE:Smooth chemical resistant (UHMW) Ultra High Molecular Weight polyethylene FDA Compliant tube. TEMPERATURE:-40C to +100C(-40F to +212F) Can be open end steam cleaned to 120C or 248F for 30. minutes. PART #

A410 UHMWPE 10 Bar Chemical Suction & Delivery Hose | Dixon

Bend Radius. 175 mm. Color. Blue. Working Pressure. 10 bar. Temperature Range. -35°C to +100°C. Burst Pressure.

UHMWPE Chemical Hose | Hose and Fittings Source

UHMWPE Chemical Hose . Appliions: Used for the the Suction and Transfer for a variety of chemicals and acids. Will handle 98% of the chemicals found in Chemical Refineries, on Chemical Trucks and Tankers. Tube: Ultra High Molecular Weight Polyethylene (UHMWPE) which is excellent with most chemicals.

Chemical Hose - Novaflex

Tube: Clear Ultra High Molecular Weight polyethylene. Reinforcement: Multiple plies of high tensile textile with dual helix Cover: Green abrasion resistant green EPDM (Available in blue, yellow black and grey, white - with 400ft order) Length: 100 ft. Temperature Range: up to -40°F (-40°C) to +250°F (+121°C). Consult chemical resistant chart.

ABRASIVE MATERIAL HANDLING HOSE ³ .DQDÁH[ KAN/2550

•Temperature: -40°C to 60°C (-40°F to 140°F) KANAVAC 180 HR ABRASIVE HIGH TEMPERATURE SUCTION HOSE •Heavy-duty suction appliions where high temperature and abrasion are factors such as vacuum trucks or the handling of À\ DVK FUXVKHG URFN VDQG SHD JUDYHO RU FHPHQW SRZGHU /LJKWZHLJKW DQG ÀH[LEOH •Integral wire helix can be grounded

WORKING PRESSURE OF R1 & R2 HOSES - MFG OF HIGH …

TEMPERATURE : Teflon flexible hoses are capable to resisting low, high temperature between -70° to +260° for longer period and have an unlimited shelf life. THUNDER HOSE APPLIION : This hose ,with steel wire screwing inlaid in the hose, is light ,transparent ,with small bending radius .It has good adaptability to

Hydraulic Hose - Rotec Hydraulics Ltd

The hose design for the future. Whenever you ask for small bend radius together with high pressure ratings and special requests concerning temperature and chemical resistance you need a ‘specialist’ out of the compact hose and fitting range. Working pressures: up to 40.0MPa. Sizes: -4 to -16. Temperature range: -50°C → +149°C.